Raspberry Pi Compute Module 3+ Lite

Author : Raspberry pi Published Time : 2019-03-05
Raspberry Pi Compute Module 3+ Lite is the same as the CM3+ except the eMMC Flash is not fitted. SD/eMMC interface pins are available for connecting an SD/eMMC device. Note that the CM3+ is electrically identical and, with the exception of higher CPU z-height, physically identical to the legacy CM3 products. CM3+ modules require a software/firmware image dated November 2018 or newer to function correctly.

Features

Hardware
Low costLow powerHigh availabilityHigh reliability
Tested over millions of Raspberry Pis Produced to dateModule IO pins have 15 micro-inch hard gold plating over 2.5 micron Nickel Software
ARMv8 Instruction SetMature and stable Linux software stack
Latest Linux Kernel supportMany drivers upstreamedStable and well-supported userlandFull availability of GPU functions using standard APIs
Raspberry pi Newest

Raspberry Pi Compute Modules 3+ is a range of DDR2-SODIMM-mechanically-compatible System on Modules (SoMs).

Date: 2019-09-17

Raspberry Pi 4 Model B is a completely upgraded and reengineered single board computer offered with 1, 2 and 4GB of RAM.

Date: 2019-07-23

Raspberry Pi Compute Module 3+ Lite is the same as the CM3+ except the eMMC Flash is not fitted.

Date: 2019-03-05

Raspberry Pi Power over Ethernet (PoE) HAT (RPI3-MODBP-POE) allows the Raspberry Pi to be powered via a power-enabled Ethernet network, removing the need for a separate power supply. 

Date: 2019-01-28

Raspberry Pi 3 Model A+ (RPI3-MODAP) is a scaled-down, lower cost version of the Raspberry Pi 3 Model B+ Single Board Computer (SBC).

Date: 2019-01-16

Raspberry Pi Raspberry Pi 3 Model B+ features a 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU Broadcom processor.

Date: 2018-07-16

Raspberry Pi 3 Model B ARMv8 w/ 1GB RAM provides the same Pi features as before but with double the ram and a much faster processor.

Date: 2017-06-29